CEW/CDW Tubes Technical Specifications

[vc_row][vc_column width=”1/1″][content align=”left”]

TECHNICAL SPECIFICATIONS

[space]

Size Thickness (T) Range
(OD)(mm) 0.80 0.90 1.00 1.20 1.6/1.5 2.00 2.20 2.50 2.8/3.0 (OD)(mm) 0.80 0.90 1.00 1.20 1.6/1.5 2.00 2.20 2.50 2.8/00 3.0 3.5 4.0
9.53 * * * * * 29.00 * * * * * * * * *
10.00 * * * * * * 29.50 * * * * * * * * *
11.00 * * * * * * 30.00 * * * * * * * * *
12.00 * * * * * * 31.10 * * * * * * * * *
12.70 * * * * * * 31.75 * * * * * * * * *
13.80 * * * * * * 33.30 * * * * * * * * *
14.00 * * * * * * 33.80 * * * * * * * * *
14.25 * * * * * * 34.00 * * * * * * * * *
15.00 * * * * * * 35.00 * * * * * * * * *
15.88 * * * * * * 36.85 * * * * * * * * *
16.00 * * * * * * * * 38.00 * * * * * * * * *
17.00 * * * * * * * * 39.00 * * * * * * * * *
17.50 * * * * * * * * 40.00 * * * * * * * * *
18.00 * * * * * * * * 41.00 * * * * * * * * *
19.05 * * * * * * * * * 42.00 * * * * * * * * * * * *
20.00 * * * * * * * * * 42.85 * * * * * * * * * * * *
21.00 * * * * * * * * * 43.20 * * * * * * * * * * * *
21.35 * * * * * * * * * 44.00 * * * * * * * * * * * *
21.70 * * * * * * * * * 45.00 * * * * * * * * * * * *
22.00 * * * * * * * * * 46.55 * * * * * * * * * * * *
22.20 * * * * * * * * * 45.80 * * * * * * * * * * * *
23.00 * * * * * * * * * 47.60 * * * * * * * * * * * *
24.00 * * * * * * * * * 47.80 * * * * * * * * * * * *
25.00 * * * * * * * * * 48.00 * * * * * * * * * * * *
25.40 * * * * * * * * * 48.60 * * * * * * * * * * * *
26.00 * * * * * * * * * 49.00 * * * * * * * * * * * *
26.80 * * * * * * * * * 49.20 * * * * * * * * * * * *
27.00 * * * * * * * * * 50.00 * * * * * * * * * * * *
27.20 * * * * * * * * * 50.80 * * * * * * * * * * * *
27.50 * * * * * * * * * 53.00 * * * * * * * * * * * *
27.80 * * * * * * * * * 54.00 * * * * * * * * * * * *
28.00 * * * * * * * * * 54.70 * * * * * * * * * * * *
28.60 * * * * * * * * * 55.00 * * * * * * * * * * * *

Note:

  • Sizes Other than mentioned above can also be manufactured up to a maximum 70 mm OD of 4mm thickness.
  • ID X OD, OD X Thickness, ID X Thickness, ID X OD X Thickness Parameters can be maintained.
  • Tubes can be supplied in ‘As Drawn’ or ‘Annealed’ condition as requirement.

[/content][/vc_column][/vc_row]